FE 250 2023
TOTAL ENDURO PRECISION
53 165 PLN
The lightest, most compact Husqvarna 4-stroke enduro bike. Smooth 4-stroke torque and power in a much lighter and more compact chassis. A new precision-built frame offers improved agility, better bump absorption and optimum suspension functionality while only weighing 8.8 kg. New laterally-mounted head-stays increase handling agility and reduce vibration. All 2017 4-stroke models have new header pipes and shorter mufflers for maximum performance within the FIM noise limits. Enduro riders face some of the toughest conditions, always looking for positive traction to drive the bike forward. The 2017 range of 4-strokes have an optimised map-switch, which also activates the Traction Control feature.
HIGH PERFORMANCE
Engine
The new 250cc engine is re-designed to be more powerful, lighter and more compact. All major components and shaft arrangements are carefully positioned to best suit the performance and handling characteristics of the overall package. As a result, the engine is 20mm shorter and 0.7 kg lighter than before weighing in at a total of 27.6 kg including electric starter. Additionally, power delivery is improved throughout the 12,800 rpm range while the engine still retains its torquey nature making the FE 250 accessible for both professional and amateur riders.
Cylinder head
The new cylinder head features advanced technology aimed at significantly reducing weight and drag. The new twin overhead camshafts are 150g lighter and rotate on a low friction surface. Additionally, the four lightweight titanium valves (intake 32.5mm, exhaust 26.5mm) are actuated by finger followers made up of a 30% harder DLC (diamond like carbon) coating while the timing drive consists of a new, shorter DID chain, with new sprockets and new chain guides all aimed at reducing friction.
Crankshaft
The new crankshaft is not only stiffer but also features a 6mm shorter stroke. The shorter stroke allows the engine to rev more freely resulting in a quick and responsive power delivery. The plain big end bearing features two force-fitted bearing shells ensuring maximum reliability and durability, guaranteeing long service intervals of 135 hours.
Crankcase
The crankcase is engineered to house the shaft arrangements at the ideal centre of gravity. The clutch shaft position has moved 11.1mm back and 26.9mm up making the engine 20mm shorter in total. The casings are manufactured using a high-pressure die cast production process, resulting in thin wall thickness while retaining exceptional reliability. The iconic Husqvarna logo adorns the bronze finished crankcase covers.
NEW GENERATION CHASSIS
Chromoly steel frame
While keeping the same successful geometry from MY 16, the hydro-formed, laser-cut and robot-welded frame is expertly crafted by WP Performance Systems. The 6mm wider and 2 mm lower steel tubes offer 20% higher torsional rigidity while longitudinal stiffness is reduced by 30%. The increased torsional rigidity improves stability and agility while reducing the longitudinal stiffness creates increased flexibility for better bump absorption and suspension functionality. The new frame weighs only 8.8 kg making it 0.6 kg lighter than its predecessor.
Composite carbon fibre subframe
The composite subframe is a design unique to Husqvarna motorcycles showcasing pioneering technology and innovation. This 3 piece component is made up of 30% carbon fibre making it remarkably light (1.4 kg) saving 1 kg over the previous design. Specific care is taken to create a calculated rigidity for optimal handling and rider ergonomics.
Aluminium swingarm
The hollow, cast aluminium swingarm is designed to offer optimal stiffness and reliability while adding the least possible weight. The machining above the rear axle allows the chain adjuster markings to be seen from above for easy maintenance.
Self cleaning footpeg mount
The Husqvarna frame features a clever, self -cleaning footpeg mount which prevents the build-up of dirt collected through deep ruts or muddy terrain. As a result, the footpeg will spring back into its original position ensuring perfect control. The large aluminium footpegs have an Enduro specific grip pattern while the position of the pegs is 6mm higher than that found on the MX models to further increase ground clearance over rocks and deep ruts.
EXCEPTIONAL CONTROL
WP Xplor 48
The WP Xplor 48 front fork is a completely new feature developed by WP Performance Systems specifically for enduro type riding. The forks consist of an open cartridge layout with a spring in each circuit and split damping functions. Compression can be adjusted from the left side and rebound on the right via clickers situated on the top of the fork tube. Additionally, with the standard pre-load adjuster, pre-load can be adjusted by the rider without the use of tools making the new system simple and easy to set up.
WP rear shock
The WP DCC rear shock is designed to provide advanced damping characteristics while keeping to a compact and lightweight design. The new rear shock weighs only 3.7 kg which is 0.36 kg lighter than the previous version. With a pressure balance inside the shock, damping is improved resulting in greater rider comfort and handling while the outer contour of the reservoir increases cooling. The component is also fully adjustable and matched to a linkage system with a specific geometry to deliver the best possible traction and absorption.
Brembo brakes
Class-leading Brembo callipers and controls with high quality GSK discs deliver superior stopping power instilling confidence in all situations. For MY17, the rear brake calliper uses a smaller piston diameter 24mm instead of 26mm, coupled with a 10mm longer rear brake lever the system delivers improved modulation and feeling.
ODI lock on grips
The ODI lock-on grip on the left side does not require gluing, while on the right, the vulcanised grip features an integrated throttle mechanism. The assembly has easy free-play adjustment and, by changing a cam, throttle progression can be altered.
PREMIUM STANDARD EQUIPMENT
Electric starter
A standard electric starter guarantees easy starting. The FE 250 is fitted with a new starter motor made by Mitsuba and is combined with a new Li-Ion battery saving 1 kg over the previous conventional battery.
Functional bodywork
Distinctive and futuristic bodywork highlight the impressive leap forward for MY17, while striking pearl blue and electric yellow colours and graphics stylishly adorn the Swedish inspired design. With completely new ergonomics, rider control and comfort are improved allowing the rider to perform at the peak for longer periods of time. The seat has a low profile design with a new high grip seat cover which keeps the rider planted under hard acceleration and in slippery conditions.
Wheels and tyres
Black high-strength alloy rims by DID are coupled to CNC machined hubs using lightweight spokes and silver anodised aluminium nipples. Fitted to the wheels are new Metzeler 6 days extreme tyres which offer superior grip on a wide variety of terrain.
Technical specs
ENGINE
- Design1-cylinder, 4-stroke engine
- Bore78 mm
- Stroke52.3 mm
- StarterElectric starter
- Transmission6-speed
- ClutchWet, DDS multi-disc clutch, Magura hydraulics
- EMSKeihin EMS
CHASSIS
- Frame design25CrMo4 steel central-tube frame
- Front suspensionWP-USD Xplor 48 with preload adjuster
- Rear suspensionWP shock absorber with linkage
- Suspension travel (front)300 mm
- Suspension travel (rear)330 mm
- Front brakeBrembo twin-piston floating calliper, brake disc
- Rear brakeBrembo single-piston floating calliper, brake disc
- Front brake disc diameter260 mm
- Rear brake disc diameter220 mm
- ChainX-Ring 5/8 x 1/4″
- Steering head angle63.5 °
- Ground clearance370 mm
- Seat height970 mm
- Tank capacity (approx.)8.5 l
- Weight without fuel105.8 kg